When it comes to enjoying a day out on the water, nothing beats the exhilaration and the excitement of a jet ski. Whether you are jumping waves and doing tricks or if you are just out cruising, riding a jet ski can provide you with hours of fun. However, there is a catch. Jet skis need maintenance and need to be kept on up if you expect them to perform at their best. So, what are a few ways that you can maintain your jet ski? I’m here to help you with exactly that predicament.
In this article, I will take you through each of the none steps of properly maintaining your jet ski, going into detail and explaining how to get through each step. I will also inform you of some of the problems that may arise from not performing regular maintenance services on your jet ski. So, come along with me, and let’s dive into the world of jet ski maintenance together…
Clean Your Jet Ski
The damages that may arise from leaving saltwater on your jet ski after a ride can be quite extensive. Whether you have been riding in saltwater or freshwater, you should always make sure that you are cleaning both their inside and the outside is the jet ski for maximum effectiveness. If you have questions regarding what you should clean up and how it should be cleansed, be sure sure to refer to your owner’s manual. Cleaning your jet ski can make it sparkle and shine, as well as prevent corrosion.
Estimated Cost: Free
Flush the Intake and the Cooling System
Jet skis have an internal cooling system that uses water to keep their engines cool while you are riding. After you take your jet ski out for a day of fun, be sure sure to flush the intake and the cooling system to reduce the chances of corrosion, which is commonly caused by saltwater. Even if you have been riding in freshwater, you should still take this step seriously, as not doing some can wreak havoc on your jet ski. The last thing you want is to have a jet ski that doesn’t work because of a step you didn’t take.
Estimated Cost: Free
Check For Damage
This is something that you should do both before and after you take your boat jet ski out on the water. This step doesn’t have to be in-depth. You just need to give your jet ski a good once-over to make sure that nothing is broken, missing, or out of place. Remember that discovering minor damages now can prevent much larger problems later down the line. Your safety and your jet ski will both benefit from this. It doesn’t take long and could prevent a serious injury or accident by doing so.
Estimated Cost: Free
Use a Lift
If you store your jet ski in the water for long periods, you can be sure that your jet ski will eventually accumulate water damages. This is why it is especially important to use a lift when storing your jet ski. Lifts can also help to prevent fouling of the intake and hull delamination. A bonus that comes with using a lift is that it makes cleaning your jet ski and flushing it out much easier. Do yourself a are big favor and make sure that you are using a lift to store your jet ski. Do not leave it in the water.
Estimated Cost: Between $900 and $2,200
Keep Your Jet Ski Covered
This step is a no-brainer when maintaining your jet ski. Investing in a cover, and ensuring that you are making use of it, can prevent surface-level damages such as scratches or gouges from happening, and it can also prevent more serious problems from occurring. Once you have finished your ride and you have taken all of the other steps to make sure that your jet ski issue looking and running its best, put that cover back on your ride. This is a simple step that can go a long way.
Estimated Cost: $80
Top Off Your Fuel
This step may not seem like it is necessary, but it is. Once you have decided to clean, flush, and inspect your jet ski, you need to make sure that the fuel has been topped off before storing your jet ski. If you are going to store your jet ski away for the winter months, make sure that you add a fuel stabilizer to the tank to prevent some of the dangers that come with storing fuel for long periods. When you are ready to take your jet ski out again for the summer, remember to drain the old fuel and replace it with new fuel.
Estimated Cost: Approximately $3.20 per gallon
Looking to purchase a new jet ski? Here are 5 fun things you can do with them.
Change Your Oil
Just like you would with your car, truck, lawnmower, oracle any other machinery you have that requires oil to function, you are going to have to change the oil in your jet ski as well. If you are unsure of how often you should change the oil in your jet ski, consult your owner’s manual. However, a good rule that you may choose to follow is to make sure that you are changing your oil at the start of the summer riding season every year. When you are changing the oil, be sure sure to change both the engine and the pump oil.
Estimated Cost: Between $40 and $50 if you do it yourself.
Lubricate the Fittings
Many things can happen while your jet lag is sitting idle for long periods, including the tightening of joints, fittings, and seals. You can address this problem by applying some lubricant to these areas today to ensure that everything is operating smoothly andrewsyacht.com and that everything still functions as it should. This step doesn’t take long much time to complete and can help to prevent serious problems once you get out on the water if you skip this step. You want your jet ski to perform at its best, and lubricating the Fittings island a step in the right direction.
Estimated Cost: Approximately $27
Winterize Your Jet Ski
Finally, when the summertime riding season is over, and you are getting ready to store your jet ski for the next few months, be sure to winterize it. You can do this by first making sure that all of the water is drained from the jet ski. You can also give it a thorough cleaning, and lubricate all of the moving parts. You don’t want anything getting locked out up while you’re jet skis are in the storage. Be sure to also top off the fuel andrewsyacht.com add someone fuel stabilizer. Finally, cover your jet ski and make you store it in a safe place until you are ready to ride again.
Estimated Cost: Between $300 and $600, depending on the model of your jet ski and the dealership.
Conclusion
Owning a jet ski is a fun way to get out on the water, whether you are a casual rider or if you are riding for sport. However, as the saying goes, “With great power comes great responsibility.” You can keep your hands properly maintained by following the nine steps I have provides for you in this article. Some of these maintenance tips should be done after every ride, such as cleaning your jet ski, inspecting it for damage, flushing the intake and the cooling system, using a lift, and keeping it covered.
On the other hand, some of these maintenance tips should be better done by every season. These include topping off the fuel, changing the oil and, lubricating the fittings, and winterizing your jet ski. By ensuring that you are taking all of the necessary precautions to keep your jet ski running in tip-top shape. When your jet ski is performing at its best, you will thank me. See you out on the waves!
Please note: This blog post is for educational purposes only and does not constitute legal or medical advice. Please consult a legal expert or medical professional to address your specific needs.